Technology partnerships

3D Modeling helps optimize the power output from Seabased’s generators

The beauty of 3D modeling is that you can see what’s happening on the inside of a complex system, as well as on the outside. 3D, hydrodynamic CFD modeling offers a good way to understand in precise detail how a linear generator responds to a buoy moving through different waves. Seabased engaged the University of Edinburgh to use their powerful 3D tool to model the direct drive linear generator´s response to different kinds of waves.

The results enable Seabased to better optimize its wave-to-grid system by maximizing the power generation achievable from multiple generators connected to one electrical system. The company is looking for the sweet spot, the optimal point, where the system can produce maximum output at minimum cost, without risking excessive wear and tear on system components.

 “It has been exciting for us to participate in this project," said Professor Markus Mueller, Chair of Electrical Generation Systems at the University’s School of Engineering. “We work with a number of companies and Seabased has advanced technology in the wave energy sector.

The project is part of an ongoing system optimization project in advance of the commercial launch of the Seabased wave-to-grid system.

One of the studies used the university’s 3D modeling capability to model how the generator reacts as the buoy moves through the waves. This information will be used to refine the system to optimize the amount of grid ready electricity that can be produced.

The goal of the second study was to acquire even more granular data around producing maximum electrical power with the correct voltage for the grid while not overheating the equipment. 

With Seabased’s technology/solution, a buoy on the surface of the ocean moves with the waves. This motion lifts a heavy, magnetized weight called a translator, up and down inside the generator. The generator – called a Wave Energy Converter, or WEC - converts this mechanical energy into electrical energy which it sends it to Seabased’s unique electrical system, also located on the seabed. This system converts the power from multiple WECs into 33kv DC electricity suited for grid use.

Seabased CEO Laurent Albert said he was pleased with the results that came out of the university. “The University has a stellar reputation,” he said. “The work they did is part of a larger campaign to reduce any margins of uncertainty in preparation for certification and industrial ramp-up of Seabased’s wave energy parks. 

We are delighted that the results they produced are in line with previously measured performances and that the study gave us tangible insights in the optimization of the whole system.”  

 As Seabased finalizes the specifications for the commercial system, it aims to maximize power output while keeping a firm cap on costs. Factors to consider in system optimization include:

  • Getting the most power, at the proper voltage, in different wave climates

  • Finding the ideal balance between power output and heat flux in the generators

  • Finding the balance between energy output and cost of energy (which includes using off-the-shelf parts)

Protecting the environment and keeping the lifecycle CO2 low

“Partnerships with organizations like the University of Edinburgh mean that many minds are working to solve the complex equations that will help bring wave energy to the renewable market,” notes Albert.

 

 

 

Seabased and ORE Catapult Complete Wave-to-Wire Simulation Software

The software will help the wave energy company extract the most power from many different types of wave climates.

Seabased and the Offshore Renewable Energy (ORE) Catapult have created a new software tool that can help Seabased optimize its wave energy system from wave to grid.

The new tool will move Seabased toward its anticipated third-party commercial certification at the end of 2021. When combined with the test bench currently under development, with continued engineering support from ORE Catapult, it will allow Seabased to quantify the amount of power customers can expect from our technology in any given wave climate.

Seabased wave energy technology comprises a buoy on the surface that, when lifted by a wave, raises a translator inside a generator on the sea floor, producing electrical power. Seabased’s system channels that power to a marine substation where the electricity is converted to a form usable by conventional grids and sent on to provide CO2-free power to the grid.

Modeling different kinds of waves

How much power can be extracted from waves depends on the average size of waves, but also on the time between waves, the length of waves, and more. While many people assume wave power will only work on coastlines with the biggest waves, Seabased’s technology was specifically designed to be able to work in many different wave climates – from robust to moderate.

The new wave-to-wire software tool created for, and in collaboration with, Seabased models how much power is generated at each step of the process. It can model many different wave climates. This will allow Seabased to optimize its system for those wave climates and extract the most power from each.

The collaboration with ORE Catapult was partly funded through the Interreg North Sea Region’s Ocean Energy Scale-up Alliance (OESA) project, which aims to accelerate the development of marine energy technologies through strategic partnerships and international collaborations. ORE Catapult is the UK’s leading technology innovation and research center for offshore renewables and supports the development of new products and services, and the growth of SMEs, in the marine renewables sector.

“We need to know exactly how much power is going through the wire,” said Francisco Francisco, Energy and Environment Officer for Seabased who, with Lead Electrical Engineer Anders Kronberg, has been working on power park array simulations for each wave climate. “Working with ORE Catapult has been really helpful. My passion is ensuring the numbers are accurate and ORE Catapult is an industry leader in these kinds of simulations.”

Quantifying the energy of waves

ORE Catapult’s Wave and Tidal Energy Sector Lead, Simon Cheeseman said: “The introduction of commercial-scale wave energy into the renewables mix would be a welcome addition as we strive to reduce our carbon footprint and meet Net Zero targets by 2050. ORE Catapult is pleased to be able to continue our support to Seabased with their ongoing technology development. Quantifying the energy taken from wave resource is vital to secure investor confidence and this new wave-to-wire simulation software is designed to do exactly that.”

Simon Stark, OESA’s Project Manager said, “This kind of collaboration is what is needed to bring the enormous promise of ocean energy to fruition. We’re really pleased to see this progress with our OESA partners.”

About Seabased

Seabased is a leader in the wave energy industry - designing, building, installing, and maintaining wave parks that use the power of ocean waves to provide cost-competitive electricity directly to the grid. Seabased’s modular, utility-scale technology generates stable and predictable power that enables grid operators to increase the amount of renewables they can incorporate into the energy mix, either through stand-alone wave parks or in combination with other renewables such as offshore wind. Seabased’s solution is also proven gentle on the environment.

About the Offshore Renewable Energy Catapult

ORE Catapult was established in 2013 by the UK Government and is part of a network of Catapults set up by Innovate UK in high growth industries. It is the UK’s leading innovation centre for offshore renewable energy.

Independent and trusted, with a unique combination of world-leading test and demonstration facilities and engineering and research expertise, ORE Catapult convenes the sector and delivers applied research, accelerating technology development, reducing risk and cost and enhancing UK-wide economic growth.

Active throughout the UK, ORE Catapult has operations in Glasgow, Blyth, Levenmouth, Aberdeen, the Humber, the East of England, the South West and Wales and operates a collaborative research partnership in China.

About Ocean Energy Scale-up Alliance

The Interreg North Sea Region Ocean Energy Scale-up Alliance (OESA) is an accelerator project aiming to develop and deploy large-scale marine energy pilots. The transnational partnership under the lead of the Dutch Marine Energy Centre (DMEC) combines expertise from 6 European countries from the North Sea Region.

Through its transnational collaboration OESA strives to strengthen the ocean energy sector. This will allow to share lessons learned and lead to the faster production of more renewable energy in the North Sea region.

 

 

The new software will help Seabased optimize its technology to extract the most power from wave climates around the world.

The new software will help Seabased optimize its technology to extract the most power from wave climates around the world.

HOME: Let Nature Design Your Renewable Strategy

This piece was originally published in Renewables Now.

by Laurent Albert, CEO

It’s time to redesign our energy strategy. And the very same nature that created an impressive energy palette with sun, wind, water, and more can show us how to do it.

Today, only 9% of the energy that powers grids worldwide comes from variable renewable energy (VRE) sources like sun and wind. Because of their intermittent nature, VREs are still considered a costly add-on to the “normal” grid. Even with the existential crisis of climate change, renewable technology investment is often treated as a luxury and decisions are driven by short-term thinking: how many megawatts can I get for my dollar with this technology versus that one?

It’s time to take a longer view. Renewables create a challenge because they’re variable; the sun sets, the wind stops. But sun and wind are not the only resources. Every point on the globe has multiple natural resources with unique synergies, an interplay between natural elements that balance each other and shape a particular climate, year in and year out. Rather than balancing one renewable resource with fossil fuels, we need to take our cues from nature and build an infrastructure designed around several resources and technologies that can balance one another. At Seabased, a European wave energy company, we call this the Hybrid Optimal Energy Mix: HOME.

The exact recipe for HOME in any given place is based on data--carefully tracking, minute by minute, the amount of potential power generated by various resources over time. Grid operators must provide a baseload of power—enough to meet the demand under normal circumstances. Historically, grid stability becomes a critical issue as soon as a certain percentage of the energy supply (15-20%) originates from intermittent sources. This explains why about 70% of our energy still comes from fossil fuels. So, the Holy Grail of a sustainable renewable energy strategy is to achieve a stable baseload by mitigating this intermittency through a robust, optimal combination of technologies and energy sources. When you track each resource meticulously, you can see at the end of a year how much of that baseload you can expect to derive from each renewable resource – and from the different resources combined.

Renewables in concert

Think of it as a symphony. Each instrument on its own delivers beautiful music, though with limitations. Flutes don’t hit the low notes. Drums don’t offer a melody. But when they work in concert--the strings, the brass, the woodwinds, the percussion, perhaps a piano--each doing what it does best, the difference is breathtaking. This is synergy: creating a whole that is more than the sum of the parts. This is what we can achieve by balancing multiple renewables.

For example, today we witness expensive windmills that are only running at a fraction of their capacity due to the intermittency and the corresponding grid limitations. But the right combination of technologies could increase the combined level of stable baseload, enabling each technology to produce at a higher level, mutually enhancing the value of each: the optimal combination of technologies is a tide that lifts all boats.

As head of a wave energy company, I am passionate about this topic. I find it a fascinating and exciting problem to learn to work with the Earth’s energy to create the best scenario based on nature, rather than extract energy in a way that harms Earth, and, ultimately, we who live on it. The tendency to embrace renewables based on their current price point has led to relatively anemic investments in ocean energy, despite the fact that the research shows wave energy could produce enough electricity for all the world’s demand. Ocean waves are more predictable than wind, more constant than sun—being a 24-hour phenomenon. And water’s density—800 times that of wind—makes waves incredibly powerful. Seabased is moving toward certification and commercialization. But, like many in the sector, we struggle against a pervasive notion that there are “enough” renewable technologies out there. We beg to differ.

If countries hope to reach their renewable goals, wean themselves off fossil fuels, and reduce their carbon output, they will need to be able to lean on all their resources. The technology will always evolve; the resources are relatively constant. The enlightened approach would be to make investments in technology that capitalize on those resources.

Bermuda at HOME: A case study

We have been working with the island of Bermuda, which, like most other islands, is entirely dependent on imported fossil fuels. Per capita, residents of Bermuda pay about three times what residents of their neighbor, the United States, pay for electricity.

Bermuda is 21 miles long and two miles wide, at its widest point. No one on Bermuda is ever more than five minutes away from the ocean, which is probably one of the reasons why, during non-pandemic times, the island attracts nearly 700,000 visitors per year. Bermuda has ample sunshine, wind, and waves, but the island also has constraints on how much it can capitalize on these resources. There is not enough available land for large wind or solar farms. So the country determined they would only be likely to derive a small amount of power from solar. And, any energy source offshore must be sufficiently invisible that it does not detract from ocean vistas.

Given these parameters, and using minute-to-minute sun, wind, and wave data in Bermuda, collected over a full year, engineers from Seabased have calculated Bermudians’ HOME. By plotting the power output of each resource on a graph, and cross-referencing it against another graph that plots variability of power produced by wind and wave, Seabased’s engineers concluded that Bermuda’s HOME would be found by supplementing the 6% of solar power with 28% wind energy and 66% wave energy. As exciting as this favorable data is for wave, we’re not quite ready for it yet – though Seabased is on track for providing competitive utility scale solutions like this in the near future.

The point is that looking at HOME tells us which mix of renewable technologies would benefit us most if they were available, and hence which are worthy of investment today, because the win – both commercial and environmental – will be enormous when we roll them out.

Making renewable decisions

The calculations for Bermuda were based on that island’s distinct geography, land mass, and access to a powerful wave climate, etc. Other climates will have a different HOME.

Ireland, for example, has wood, water, wind, wave and some wastes as key renewable energy sources. Its wave climate is dynamic, with waves up to three meters average on the West Coast and from one to two meters in the Irish Sea. In addition, there are only about 1,400 hours of sunlight per year—averaging less than four hours a day. Some inland places average fewer than two windy days a year, while northern coastal locations may have more than 50.

After plotting the resource’s potential power output, communities must explore and consider the possible constraints of land and/or water use. Finally, they will be able to calculate which renewable hybrid mix will produce the most stable power to the respective community; they will know their HOME. Donegal will likely have a different HOME than Galway Bay or Cork. However, the natural energy resources for each of these locations are consistent over time. 

Our 21st-century data collection and analysis tools give us a powerful new window into how the Earth’s resources work, separately and in tandem. With these tools, we can make precise decisions, with small margins, that can drive in significant value and benefits to our society. Over time, our technology and the way we use power will change. What will remain relatively constant—even with climate change—is the resources that make up the environment in our communities. We must design our renewable architecture based on an optimal mix of the resources themselves. 

Building the renewable energy world for 2050 starts at HOME.

 

 

 

 

 

 

 

 

 

 

 

OESA Accelerator Will Help Bring Ocean Energy to the Grid

Ocean energy companies face many shared challenges: Building machinery that can withstand decades of pummeling from moving saltwater; designing adaptive tech for a resource that is often calm, but can be wild; pulling power from the ocean without hurting the ecosystem. The promise of ocean energy is well worth it, but overcoming the challenges will require a lot of good minds working together. Innovation is faster when we collaborate from different angles and perspectives. That’s why the Ocean Energy Scale-up Alliance (OESA) is so exciting.

OESA is a Pilot Accelerator Program for ocean energy technologies. It was launched in 2019 to enable various ocean energy companies to work together to propel promising ocean energy technologies toward commercialization. Led by the Dutch Marine Energy Centre (DMEC), the transnational partnership combines expertise from six European countries from the North Sea Region. Its first program has a €6.2 million budget and is supported through €3.1 million in European Regional Development Funds through Interreg.

Designing and deploying utility-scale ocean energy could be a game-changer for renewables. By creating an international effort, and exchanging expertise and experience in one European program, OESA hopes to reduce the costs of developing energy technology pilots, accelerating their deployment, and making renewable power more affordable and accessible around the world.

The challenge of ocean energy

As noted by Simon Stark, OESA’s project manager: “Putting something under water is like putting something into space…. Unlike other accelerators, we don’t just have to deal with innovation and the creative process. We’re dealing with very hard basic engineering and system engineering, and developers having to learn the hard way.”

“OESA is an accelerator for a whole new vertical in renewables,” said Marcelle Askew, VP of Projects for Seabased, which is one of four technology developers benefiting from the OESA’s grant. “These projects have never been done before; there’s no supply chain with parts you can just pull off the shelf.”

Askew noted that other technology accelerators don’t quite meet the needs of marine energy technology developers. “We’re trying to develop an industry, not an app. We’ve got to manufacture and certify heavy equipment that you can only validate in the harsh ocean environment it will operate in. We need to find cost-effective ways to test and optimize before putting devices in the ocean.”

She also pointed out the different timelines to market. While many tech startups can go from concept to commercial roll-out in a few months, utility scale power parks take years. “So, I think it’s fantastic that we get to work with some of the leading organizations in the industry and share our knowledge and experience,” she said. “It’s enabling us to more quickly march toward certification and industrial ramp-up.”

Uniting ideas, money, and policy

Now almost halfway through its first three-year program, OESA aspires to:

· Successfully accelerate four technologies to achieve large scale deployments

· Combine services of project partners to increase value

· Influence important stakeholders from Offshore, Investment and policy makers

Twelve organizations are combining their expertise in offshore engineering, ocean energy testing, technology development, and market development. Four tech developers, including Seabased, are charged with making sure the program offer is tailored to the most urgent needs of the industry. The eight service partners are combining their expertise to offer a portfolio that covers both technological as well as commercial services. This will not only lead to the immediate acceleration of pilot development, but also ensure the sustainable growth of technology companies.

This project, the first to build an alliance between the Nordics and North-West Europe, brings stakeholders from the offshore industry, investment business, and policy makers together into one platform that aims to demonstrate ocean energy’s potential and hopefully secure support for future deployments.

“It’s not just about taking one pilot, one technology to the water,” said Stark. “We’re focused much more on trying to tackle similar problems across different developers at the same time, to streamline the process.”

 Seabased in OESA

With support from OESA, Seabased is working with EMEC on the design of a testing program which will move us toward certification. We’re also working with ORE Catapult on a unique, wave-to-grid, simulation software tool that will show us how to glean the most energy from all the different wave environments we hope to work in around the world. We are also working with Uppsala University on test planning and data analysis.

“These partnerships, collaborations, and relationships built across the industry are helping ocean energy take its place among renewables as an important natural resource that can help transform the energy profile of coastal communities,” said Askew.

OESA, Stark said, is about looking at ocean energy holistically. And that’s how a nascent industry is going to be able to quickly join other renewables in tackling CO2 and climate change.

Europe leads the world in ocean energy development and the North Sea region is a leader in the sector within Europe. OESA’s first program includes eight service providers:

 Dutch Marine Energy Center (DMEC)

Aalborg University

AKP

Danish Wave Energy Center (DanWEC)

European Marine Energy Center (EMEC)

Offshore Renewable Energy Catapult (OREC)

SSPA Sweden

Uppsala University

 The four technology developers are

Seabased

Nemos

Floating Power Plant

SeaTwirl